Show Spanning-Tree Msti - Dell Z9500 Command Reference Manual

Table of Contents

show spanning-tree msti

View the multiple spanning tree instance.

show spanning-tree msti [instance-number [brief]] [guard]

This guide is platform-specific. For command information about other platforms,

refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Enable the multiple spanning tree protocol prior to using this command.

Dell#show spanning-tree msti 10

MSTI 10 VLANs mapped 101-105

Bridge Identifier has priority 32768, Address 0001.e802.3506

Configured hello time 2, max age 20, forward delay 15, max

Multiple Spanning Tree Protocol (MSTP)

(Optional) Enter the multiple spanning tree instance number.

The range is from 0 to 63.

(Optional) Enter the keyword brief to view a synopsis of the

MST instance.

(Optional) Enter the keyword guard to display the type of

guard enabled on an MSTP interface and the current port

EXEC Privilege

Introduced on the Z9500.

Introduced on the S4820T.

Introduced on the Z9000.

Support for the optional keyword guard was added on the

C-Series, S-Series, and E-Series TeraScale.

Introduced on the S4810.

Introduced on the S-Series.

Introduced on the C-Series.

Expanded to display the port error disable state (EDS)

loopback BPDU inconsistency causes.