Spanning-Tree Msti - Dell Z9500 Command Reference Manual

Table of Contents

spanning-tree

This guide is platform-specific. For command information about other platforms,

refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

spanning-tree msti

Configure multiple spanning tree instance cost and priority for an interface.

spanning-tree msti instance {cost cost | priority priority}

msti instance

priority priority

Enter the keywords spanning-tree to enable the MSTP on

the interface.

Introduced on the Z9500.

Introduced on the S4820T.

Introduced on the Z9000.

Introduced on the S4810.

Introduced on the S-Series.

Introduced on the C-Series.

Introduced on the E-Series.

Enter the keyword msti and the MST instance number. The

range is from zero (0) to 63.

(OPTIONAL) Enter the keyword cost then the port cost

value. The range is from 1 to 200000. The defaults are:

10-Gigabit Ethernet interface = 2000

Port Channel interface with one 10 Gigabit Ethernet =

Port Channel with two 10 Gigabit Ethernet = 1800

Enter keyword priority then a value in increments of 16 as

the priority. The range is from 0 to 240. The default is 128.

Multiple Spanning Tree Protocol (MSTP)