Redistribute - Dell Z9500 Command Reference Manual

Table of Contents

no passive-interface interface

No passive-interface default

redistribute

Redistribute information from another routing protocol throughout the OSPF process.

redistribute {connected | rip | static} [metric metric-value |

metric-type type-value] [route-map map-name] [tag tag-value]

To disable redistribution, use the no redistribute {connected | isis |

rip | static} command.

metric metric-

tag tag-value

All previous no passive-interface interface commands are removed

from the running configuration.

Remove the interface from the passive list.

The ABR status for the router is updated.

If passive-interface default is specified, then save no passive-

interface interface into the running configuration.

Clear everything and revert to the default behavior.

All previously marked passive interfaces are removed.

May update ABR status.

Enter the keyword connected to specify that information

from active routes on interfaces is redistributed.

Enter the keyword rip to specify that RIP routing

information is redistributed.

Enter the keyword static to specify that information from

static routes is redistributed.

(OPTIONAL) Enter the keyword metric then a number. The

range is from 0 (zero) to 16777214.

(OPTIONAL) Enter the keywords metric-type then one of

the following:

1 = OSPF External type 1

2 = OSPF External type 2

(OPTIONAL) Enter the keywords route-map then the name

of the route map.

(OPTIONAL) Enter the keyword tag then a number. The

range is from 0 to 4294967295.

Open Shortest Path First (OSPFv2 and OSPFv3)