Ip Pim Query-Interval - Dell Z9500 Command Reference Manual

Table of Contents

Do not enter this command before creating the access-list.

ip pim query-interval

Change the frequency of PIM Router-Query messages.

ip pim query-interval seconds

To return to the default value, use the no ip pim query-interval seconds

This guide is platform-specific. For command information about other platforms,

refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Introduced on the S4810.

Introduced on the E-Series ExaScale.

Introduced on the C-Series and S-Series.

Introduced on the E-Series.

Enter a number as the number of seconds between router

query messages. The range is from 0 to 65535. The default is

Introduced on the S6000-ON.

Introduced on the Z9500.

Introduced on the S6000.

Introduced on the S4820T.

Introduced on the Z9000.

Introduced on the S4810.

Introduced on the E-Series ExaScale.

Introduced on the C-Series for the port-channels and the S-

PIM-Sparse Mode (PIM-SM)