Qos-Policy-Input - Dell Z9500 Command Reference Manual

Table of Contents

policy-aggregate

using policy maps.

service-policy output

qos-policy-input

Create a QoS input policy on the router.

qos-policy-input qos-policy-name [layer2] [cpu-qos]

To remove an existing input QoS policy from the router, use the no qos-policy-

input qos-policy-name [layer2] [cpu-qos] command.

CONFIGURATION

This guide is platform-specific. For command information about other platforms,

refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Quality of Service (QoS)

— allows an aggregate method of configuring per-port QoS

— applies an output policy map to the selected interface.

Enter the name for the policy map in character format (32

characters maximum).

(OPTIONAL) Enter the keyword layer2 to specify a Layer 2

Class Map. The default is Layer 3.

Enter the keyword cpu-qos to create a QoS input policy to

be used to rate-limit control-plane traffic (CoPP).

Introduced on the Z9500.

Introduced on the S4820T.

Introduced on the Z9000.

Introduced on the S4810.

Policy name character limit increased from 16 to 32.

Introduced on the C-Series and S-Series.

Introduced on the C-Series.

Introduced on the E-Series.