Distribute-List Out - Dell Z9500 Command Reference Manual

Table of Contents

pre- 6.2.1.1

ip prefix-list

distribute-list out

Configure a filter for outgoing routing updates.

distribute-list prefix-list-name out [interface | bgp |

connected | isis |ospf | static]

To delete the filter, use the no distribute-list prefix-list-name out

prefix-list-

Not configured.

Introduced on the C-Series.

Introduced on the E-Series.

— enters PREFIX-LIST mode and configures a prefix list.

Enter the name of a configured prefix list.

(OPTIONAL) Identifies the interface type slot/port as one of

the following:

For a Port Channel interface, enter the keywords port-

channel then a number. The range is from 1 to 512.

For a 10-Gigabit Ethernet interface, enter the keyword

TenGigabitEthernet then the slot/port information.

For a 40-Gigabit Ethernet interface, enter the keyword

fortyGigE then the slot/port information.

For a VLAN, enter the keyword vlan then a number from

(OPTIONAL) Enter the keyword connected to filter only

directly connected routes.

(OPTIONAL) Enter the keyword isis to filter only IS-IS

(OPTIONAL) Enter the keyword ospf to filter all OSPF routes.

(OPTIONAL) Enter the keyword static to filter manually

configured routes.

Routing Information Protocol (RIP)