Table of Contents
Advertisement
Item
AI-Synchronization
4
ID Remote Control Function
You can set the remote control ID when you want to use this remote control on one of several different displays.
1
Switch
to
2
Press the
button on the remote control.
3
Press one of
4
Press one of
Notes:
• The numbers in 2, 3 and 4 should be set up quickly.
• Adjustable ID number range is 0 - 99.
• If a number button is pressed more than two times, the fi rst two numbers become the ID number for the remote
control.
ID remote control button operation
The operation is the same as normal remote control except for the
ID Cancellation
Press
button on remote control. (This has the same effect as pressing the
Notes:
• Set the Remote ID "On" to operate the ID remote control.
If remote ID is set to "On", you can use the remote control without identical ID number during option menu display.
(see page 43)
• The ID remote control cannot be used when ID select is set to anything other than 0, and the remote control ID is
not the same as the ID select number (see page 43).
Select "Off" or "On".
Note:
If you set AI-synchronization to On, the following menus will be unavailable and these settings
will be fi xed to the initial values.
Picture menu: Colour, Hue, Input level (Advanced settings)
Press twice to exit from Setup.
on the right side.
-
,
for the tens digit setting.
-
,
for the units digit setting.
Setup for MULTI DISPLAY
Details
The brightness depends on each
display's setting.
Off
button.
Equalize the brightness of all the
displays.
On
,
,
buttons at the same time.)
33
Hide quick links:
Advertisement
Table of Contents
