Privilege Level (Configuration Mode) - Dell Z9500 Reference Manual

Table of Contents

privilege level (CONFIGURATION mode)

Change the access or privilege level of one or more commands.

privilege mode {level level command | reset command}

To delete access to a level and command, use the no privilege mode level

level command command.

Not configured.

CONFIGURATION

This guide is platform-specific. For command information about other platforms,

refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Enter one of the following keywords as the mode for which

you are controlling access:

configure for CONFIGURATION mode

exec for EXEC mode

interface for INTERFACE modes

line for LINE mode

route-map for ROUTE-MAP mode

router for ROUTER OSPF, ROUTER RIP, ROUTER ISIS

and ROUTER BGP modes

Enter the keyword level then a number for the access level.

The range is from 0 to 15.

Level 1 is EXEC mode and Level 15 allows access to all CLI

modes and commands.

Enter the keyword reset to return the security level to the

default setting.

Enter the command's keywords to assign the command to a

certain access level. You can enter one or all of the

Introduced on the Z9500.

Introduced on the S4820T.

Introduced on the Z9000.