Ntp Source - Dell Z9500 Reference Manual

Table of Contents

ntp source

Specify an interface's IP address to be included in the NTP packets.

ntp source interface

To delete the configuration, use the no ntp source command.

Not configured.

CONFIGURATION

This guide is platform-specific. For command information about other platforms,

refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Enter the following keywords and slot/port or number

information:

For a 10-Gigabit Ethernet interface, enter the keyword

TenGigabitEthernet then the slot/port information.

For a 40-Gigabit Ethernet interface, enter the keyword

fortyGigE then the slot/port information.

For a Loopback interface, enter the keyword loopback

then a number from 0 to 16383.

For a Port Channel interface, enter the keyword lag then

a number. The range is from 1 to 512.

For VLAN interface, enter the keyword vlan then a

number from 1 to 4094.

Introduced on the S6000-ON.

Introduced on the S6000.

Introduced on the Z9000.

Added support for 4-port 40G line cards on ExaScale.

Introduced on the S-Series.

Introduced on the C-Series.

Introduced on the E-Series.

System Time and Date