Ntp Trusted-Key; Show Clock - Dell Z9500 Reference Manual

Table of Contents

ntp trusted-key

Set a key to authenticate the system to which NTP synchronizes.

ntp trusted-key number

To delete the key, use the no ntp trusted-key number command.

Not configured.

CONFIGURATION

This guide is platform-specific. For command information about other platforms,

refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

The number parameter in the ntp trusted-key command must be the same

number as the number parameter in the ntp authentication-key command. If

you change the ntp authentication-key command, you must also change the

ntp trusted-key command.

ntp authentication-key

ntp authenticate

Display the current clock settings.

show clock [detail]

System Time and Date

Enter a number as the trusted key ID. The range is from 1 to

Introduced on the Z9500.

Introduced on the Z9000.

Introduced on the S-Series.

Introduced on the C-Series.

Introduced on the E-Series.

— sets an authentication key for NTP.

— enables the NTP authentication parameters you set.