Dell Z9500 Reference Manual page 284

Table of Contents

ge min-prefix-

le max-prefix-

Not configured.

This guide is platform-specific. For command information about other platforms,

refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Sequence numbers for this filter are automatically assigned starting at sequence

If you do not use the ge or le options, only packets with an exact match to the

prefix are filtered.

Specify an IP prefix in the network/length format. For

example, 35.0.0.0/ 8 means match the first 8 bits of address

(OPTIONAL) Enter the keyword ge and then enter the

minimum prefix length, which is a number from zero (0) to

(OPTIONAL) Enter the keyword le and then enter the

maximum prefix length, which is a number from zero (0) to

Introduced on the Z9500.

Introduced on the S4820T.

Introduced on the Z9000.

Introduced on the S4810.

Introduced on the E-Series ExaScale.

Introduced on the S-Series.

Introduced on the C-Series.

Introduced on the E-Series.

— configures a filter to pass packets.

— configures a drop or permit filter with a specified sequence number.

Access Control Lists (ACL)