Dell Z9500 Reference Manual page 935

Table of Contents

mask [longer-

member-info}

This guide is platform-specific. For command information about other platforms,

refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

The following describes the show ip cam command shown in the following

IPv4 Routing

(OPTIONAL) Enter the IP address and mask of a route to

CAM entries for that route only. Enter the keyword longer-

prefixes to view routes with a common prefix.

(OPTIONAL) Enter the keyword ecmp-group and specify if

you want to display detailed CAM information about an

ECMP group or about individual ECMP-group member ports.

(OPTIONAL) Enter the keyword summary to view a table

listing route prefixes and the total number of routes that can

be entered into the CAM.

EXEC Privilege

Introduced on the Z9500.

Introduced on the S4820T.

Introduced on the S4810.

Introduced on the E-Series ExaScale E600i.

Introduced on the E-Series ExaScale.

Introduced VRF on the E-Series.

Introduced on the C-Series.

Introduced on the E-Series.

Displays the CAM index number of the entry.

Displays the destination route of the index.

Displays the number of equal cost multipaths (ECMP)

available for the default route for non-Jumbo line cards. For

Jumbo line cards, displays 0,1 when ECMP is more than

Displays a 1 if the entry is valid and a 0 if the entry is for a

line card with Catalog number beginning with LC-EF.