Dell Z9500 Reference Manual page 938

Table of Contents

This guide is platform-specific. For command information about other platforms,

refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

The following describes the show ip fib command shown in the following

Dell>show ip fib linecard 2

---------------------------------------------------------------

-----------------

(OPTIONAL) Enter the keyword summary to view the total

number of prefixes in the FIB.

EXEC Privilege

Introduced on the Z9500.

Introduced on the S4820T.

Introduced on the S4810.

Introduced on the E-Series ExaScale.

Introduced VRF on the E-Series.

Introduced on the C-Series.

Introduced on the E-Series.

Lists the destination IP address.

Displays either the word "direct" and an interface for a

directly connected route or the remote IP address used to

forward the traffic.

Displays the first hop IP address.

Displays the MAC address.

Displays the egress-port information.

Displays the VLAN ID. If no VLAN is assigned, zero (0) is

Displays the internal interface number.

Displays the number of ECMP paths.

VId Index EC

via 100.10.10.10, So 2/8 100.10.10.10

IPv4 Routing