Clear Ipv6 Fib - Dell Z9500 Reference Manual

Table of Contents

You can partition the LPM table to store extended IPv6 route prefixes with /65

to /128 mask lengths. LPM CAM partitioning requires a switch reload to take effect.

To disable LPM CAM partitioning and return the number of the IPv6 /65-/128 route

prefixes stored in Partition 1 to 0, enter the no cam-ipv6 extended-prefix

clear ipv6 fib

Clear (refresh) all forwarding information base (FIB) entries on a linecard or stack unit.

clear ipv6 fib [vrf vrf-name] linecard slot | stack-unit unit-

vrf vrf–name

EXEC Privilege

This guide is platform-specific. For command information about other platforms,

refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

(Optional) Enter the keyword vrf followed by the name of the

VRF to clear the neighbor corresponding to that VRF.

NOTE: If you do not specify this option, neighbors

corresponding to the default VRF are cleared.

Enter the slot number to clear the FIB for a linecard.

Enter the stack member number.

Added support for VRF.

Introduced on the Z9000.

Introduced on the S4820T.

Introduced on the S4810.

Introduced on the E-Series ExaScale.

Introduced on the C-Series and S-Series.

Introduced on the E-Series TeraScale.