free hit counter

Dhcp Server; Dynamic Pool Settings - D-Link DAP-2230 User Manual

Wireless n poe access point
Table of Contents

Advertisement

Section 3 - Configuration
The DHCP address pool defines the range of the IP addresses that can be assigned to stations on the network. A Dynamic Pool
allows wireless stations to receive an available IP with lease time control. If needed or required for the network, the DAP-2230
is capable of acting as a DHCP server.
Function
Dynamic Host Configuration Protocol (DHCP) assigns dynamic IP addresses
Enable/
to devices on the network. This protocol simplifies network management and
allows new wireless devices to receive IP addresses automatically without
Disable:
the need to manually assign new IP addresses. Select Enable to allow the
DAP-2230 to function as a DHCP server.
IP Assigned
Input the first IP address available for assignment on your network.
From:
IP Pool
Enter the number of IP addresses available for assignment. IP addresses are
Range
increments of the IP address specified in the "IP Assigned From" field.
(1-254):
Subnet
All devices in the network must have the same subnet mask to communicate.
Mask:
Enter the submask for the network here.
Gateway:
Enter the IP address of the gateway on the network.
WINS:
Specify the Windows Internet Naming Service (WINS) server address for
the wireless network. WINS is a system that determines the IP address of a
network computer that has a dynamically assigned IP address.
DNS:
Enter the IP address of the Domain Name System (DNS) server. The DNS
server translates domain names such as www.dlink.com into IP addresses.
Domain
Enter the domain name of the network, if applicable. (An example of a
domain name is: www.dlink.com.)
Name:
Lease Time :
The lease time is the period of time before the DHCP server will assign new
IP addresses. (60-31536000 sec)
D-Link DAP-2230 User Manual

DHCP Server

Dynamic Pool Settings

59

Advertisement

Table of Contents
loading