Adjustment Instruction; Designation; Main Pcb Check Process - LG 32LN5400 Service Manual
Led tv
Hide thumbs
Also See for 32LN5400:
- User manual (97 pages) ,
- Owner's manual (85 pages) ,
- Owner's manual (42 pages)
Table of Contents
Advertisement
1. Application
This spec sheet is applied all of the LED TV with LJ36B
chassis
2. Designation
(1) The adjustment is according to the order which is
designated and which must be followed, according to the
plan whic al Unit: Product Specification Standard.
(2) Power adjustment : Free Voltage.
(3) Magnetic Field Condition: Nil.
(4) Input signal Unit: Product Specification Standard.
(5) Reserve after operation: Above 5 Minutes (Heat Run).
Temperature : at 25 ºC±5 ºC
Relative humidity : 65 ± 10%
Input voltage : 100~220V, 50/60Hz
(6) Adjustment equipments : Color Analyzer (CA-210 or
CA-110), SVC remote controller
(7) Push The "IN STOP KEY" – For memory initialization.
Case1 : Software version up
1) After downloading S/W by USB , TV set will reboot
automatically
2) Push "In-stop" key
3) Push "Power on" key
4) Function inspection
5) After function inspection, Push "In-stop" key.
Case2 : Function check at the assembly line
1) When TV set is entering on the assembly line, Push
"In-stop" key at first.
2) Push "Power on" key for turning it on.
=> If you push "Power on" key, TV set will recover channel
information by itself.
3).After function inspection, Push "In-stop" key.
Copyright ©
LG Electronics. Inc. All rights reserved.
Only for training and service purposes
ADJUSTMENT INSTRUCTION
- 10 -
3. Main PCB check process
* APC – After Manual-Insert, executing APC
* Boot file Download
(1) Execute ISP program "Mstar ISP Utility" and then click
"Config" tab.
(2) Set as below, and then click "Auto Detect" and check "OK"
message.
If "Error" is displayed, Check connection between
computer, jig, and set.
(3) Click "Read" tab, and then load download file (XXXX.bin)
by clicking "Read"
(1)
filexxx.bin
(4) Click "Connect" tab. If "Can't " is displayed, Check
connection between computer, jig, and set.
Please Check the Speed
To use speed between
from 200KHz to 400KHz
(5) Click "Auto" tab and set as below.
(6) Click "Run".
(7) After downloading, check "OK" message.
(4)
filexxx.bin
(2)
(3)
(5)
(7)...........OK
(6)
LGE Internal Use Only
- Quick Links:
- Service Manual
Hide quick links:
Advertisement
Table of Contents
