Honeywell MM14CCS Owner's Manual page 9

Portable air conditioner

Hide thumbs Also See for MM14CCS:

Table of Contents

Available languages

Through a Drilled Hole in the Wall or Window

If required, your Portable Air Conditioner can be installed semi-permanently.

Drill a hole in an outside wall or through a window pane. Respect the height and

dimensions of the hole given in Fig. 2.

Insert & secure the Flange Fixture into the newly drilled hole.

Fix one end of the Plastic Hose into the Flange Fixture that was secured on the wall.

Fix the other end of the Plastic Hose onto the Hose Connector and then onto the rear

Exhaust outlet of the unit (See Fig. 3).

NOTE: When the unit is not in use, remove the Plastic Hose from the Flange Fixture on

the wall and use the included Hole Cover to cover the hole on the wall.

IMPORTANT: When installing the air conditioner semi-permanently, you should leave a

door slightly open (as little as 1cm) to guarantee sufficient ventilation.

30 cm

Fig.1

30 cm

in the wooden

in the

kickboard of a

window

french window

panel

Fig.2

in the wall : you are

recommecded to

insulate the section

of wall using suitable

insulation

Fig.3

INSTALLATION

Table of Contents

Show Quick Links

Chapters

Table of Contents