Table of Contents
Advertisement
DGS-3700 Series Layer 2 Managed Gigabit Ethernet Switch CLI Reference Guide
DGS-3700-12:5#delete mld_snooping static_group vlanid 1
Command: delete mld_snooping static_group vlanid 1
Success.
DGS-3700-12:5#
config mld_snooping static_group
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To add port 5 to static group FF12::1 on VID 1:
DGS-3700-12:5#config mld_snooping static_group vlanid 1
Command: config mld_snooping static_group vlanid 1
Success.
DGS-3700-12:5#
show mld_snooping statistic counter
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To view MLD snooping statistic on VID 1:
Used to configure the current MLD snooping static group on the Switch.
config mld_snooping static_group [ vlan <vlan_name 32> | vlanid <vlanid_list> ]
<ipv6addr> [ add | delete] <portlist>
This command is used to add or delete ports to/from the given static group.
vlan − The name of the VLAN for which to configure MLD snooping static group
information.
vlanid − The list of the VLAN IDs for which to configure MLD snooping static group
information.
< ipv6addr > − The static group IPv6 address for which to configure MLD snooping
static group information.
[ add | delete] <portlist> − Portlist to add or delete.
Only Administrator and Operator-level users can issue this command.
Used to view the current MLD snooping statistic on the Switch.
show mld_snooping statistic counter [vlan <vlan_name 32> | vlanid <vlanid_list>
| ports <portlist>]
This command is used to view this information, MLD snooping must be enabled first.
vlan − The name of the VLAN for which to view MLD snooping statistic counter.
vlanid − The list of the VLAN ID for which to view MLD snooping statistic counter.
ports − The list of the ports for which to view MLD snooping statistic counter.
Only Administrator and Operator-level users can issue this command.
FF12::1
FF12::1 add 5
Page | 253
FF12::1
FF12::1 add 5
Advertisement
Chapters
Table of Contents
