Table of Contents
Advertisement
DGS-3700 Series Layer 2 Managed Gigabit Ethernet Switch CLI Reference Guide
DGS-3700-12:5# create vlan_translation ports 1-4 add cvid 10 svid 100 priority 4
Command: create vlan_translation ports 1-4 add cvid 10 svid 100 priority 4
Success.
DGS-3700-12:5#
delete vlan_translation ports
Used to delete pre-created VLAN translation rules
Purpose
Syntax
delete vlan_translation ports [<portlist> | all] {cvid <vidlist>}
Description
The command used to delete pre-created VLAN translation rules.
ports − A range of ports which the rule will be deleted.
Parameters
cvid − Specify C-VLAN range which the rules will be deleted. If no specify the
Restrictions
Only Administrator and Operator-level users can issue this command.
Example usage:
To delete vlan translation rule on ports 1-4:
DGS-3700-12:5# delete vlan_translation ports 1-4
Command: delete vlan_translation ports 1-4
Success.
DGS-3700-12:5#
show vlan_translation
Purpose
Used to show pre-created C-VLAN based SP-VLAN assignment rules.
Syntax
show vlan_translation {[ports <portlist> | cvid <vidlist> | hardware] }
The command used to show pre-created C-VLAN based SP-VLAN assignment rules.
Description
ports − A range of ports which the rules will be displayed.
Parameters
cvid − Specify C-VLAN range which the rules will be displayed. If no specify the
If no parameters specified, all rules will be displayed.
hardware – If this is specified, the hardware VLAN translation entries will be
Restrictions
None.
Example usage:
To show vlan_translation rules in the system:
parameter, all rules on the specified ports will be deleted.
parameter, all rules on the specified ports will be displayed.
displayed.
Page | 287
Advertisement
Chapters
Table of Contents
