Table of Contents
Advertisement
DGS-3700 Series Layer 2 Managed Gigabit Ethernet Switch CLI Reference Guide
C
OMMAND
config radius
show radius
ports
show auth_statistics
show
enable 802.1x
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To enable 802.1X switch globally:
DGS-3700-12:5#enable 802.1x
Command: enable 802.1x
Success.
DGS-3700-12:5#
disable 802.1x
Purpose
Syntax
Description
Parameters
Restrictions
P
ARAMETERS
<server_index 1-3> {ipaddress [<server_ip> | <ipv6addr>] | key <passwd 32>
| auth_port[<udp_port_number 1-65535 > | default] | acct_port
[<udp_port_number 1-65535 > | default ] | timeout [<int 1-255> | default] |
retransmit [<int 1-20> | default ]}
<vlan_name 32>
[<portlist> | all] state [enable | disable]
<vlan_name 32>
{ports [<portlist>|all]}
{ports [<portlist>|all]}
{ports [<portlist>|all]}
[network | shell | system] state [enable|disable]
Used to enable the 802.1X server on the Switch.
enable 802.1x
This command is used to enable the 802.1X Network Access control server
application on the Switch. To select between port-based or MAC-based, use the
config 802.1x auth_mode command.
None.
Only Administrator and Operator-level users can issue this command.
Used to disable the 802.1X server on the Switch.
disable 802.1x
This command is used to disable the 802.1X Network Access control server
application on the Switch.
None.
Only Administrator and Operator-level users can issue this command.
Page | 387
Advertisement
Chapters
Table of Contents
