Table of Contents
Advertisement
DGS-3700 Series Layer 2 Managed Gigabit Ethernet Switch CLI Reference Guide
S
U
WITCH
TILITY
Back to Section Header
The switch utility commands in the Command Line Interface (CLI) are listed (along with the appropriate
parameters) in the following table.
C
OMMAND
download
config firmware image_id
show firmware information
show config
upload
enable autoconfig
disable autoconfig
show autoconfig
config configuration
ping
ping6
traceroute
traceroute6
telnet
Each command is listed, in detail, in the following sections.
download
Purpose
Syntax
Description
C
OMMANDS
P
ARAMETERS
[ firmware_fromTFTP [<ipaddr> |<ipv6addr>] src_file <path_filename
64> {image_id <int 1-2>} | cfg_fromTFTP [<ipaddr> |<ipv6addr>]
src_file <path_filename 64> {[<config_id 1-2> | increment]} ]
<int 1-2> [delete|boot_up]
[[effective | modified | current_config | config_in_nvram <config_id 1-2>]
{ [include | exclude| begin] <filter_string 80> {<filter_string 80>
{<filter_string 80>} } { [include | exclude | begin ] <filter_string 80>
{<filter_string 80> {<filter_string 80>} } { [include | exclude | begin ]
<filter_string 80> {<filter_string 80> {<filter_string 80>}}}}}]
[ cfg_toTFTP [<ipaddr> |<ipv6addr>] dest_file <path_filename 64>
{ <config_id 1-2>} { [include | exclude| begin] <filter_string 80>
{<filter_string 80> {<filter_string 80>} } { [include | exclude | begin ]
<filter_string 80> {<filter_string 80> {<filter_string 80>} } { [include |
exclude | begin ] <filter_string 80> {<filter_string 80> {<filter_string
80>} } } } } | log_toTFTP [<ipaddr> |<ipv6addr>] dest_file
<path_filename 64> | attack_log_toTFTP [<ipaddr> |<ipv6addr>]
dest_file <path_filename 64> ]
<config_id 1-2> [boot_up | delete | active]
<ipaddr> {times <value 1-255>} {timeout <sec 1-99>}
<ipv6addr> {times <value 1-255>| size <value 1-6000>| timeout <value 1-
10>}
<ipaddr> {ttl <value 1-60>} {port <value 30000-64900>} {timeout <sec
1-65535>} {probe <value 1-9>}
<ipv6addr> {ttl <value 1-60> | port <value 30000-64900> | timeout <sec
1-65535> | probe <value 1-9>}
<ipaddr> {tcp_port <value 0-65535>}
Used to download and install new firmware or a Switch configuration file from a
TFTP server.
download [ firmware_fromTFTP [<ipaddr> |<ipv6addr>] src_file
<path_filename 64> {image_id <int 1-2>} | cfg_fromTFTP [<ipaddr>
|<ipv6addr>] src_file <path_filename 64> {[<config_id 1-2> | increment]}]
This command is used to download a new firmware or a Switch configuration file
from a TFTP server.
Page | 53
Advertisement
Chapters
Table of Contents
