Table of Contents
Advertisement
32 | Adjusting the MAIN MENU
6.2.2 Temperature levels for the operating
modes
Menu: Heating > Heating levels
Use this menu to permanently set the
temperature levels for the 3 operating modes
(Comfort
/ Economy
your personal preferences and your home.
Comfort
= maximum temperature required
•
(e.g. when the living areas are occupied and
the occupants require a comfortable room
temperature). Solid segments on the display
indicate the period for which this operating
mode is active.
Economy
= average temperature required
•
(e.g. when a lower temperature is sufficient or
when the home is empty or everyone is in bed
and you do not want the house to cool down
too much). Empty segments on the display
indicate the period for which this operating
mode is active.
Frost
= minimum required temperature
•
(e.g. when the home is empty or everyone is in
bed and it is OK for the house to cool down).
Consider any pets and plants.
6 720 800 817 (2012/02)
/ Frost
) to suit
6.3
DHW program
Main menu: Domestic hot water
Set the DHW temperature controller
on the heating appliance to the
maximum required DHW
temperature.
If a DHW cylinder is connected to
the IPM downstream of the low loss
header, turn the flow temperature
controller on the heating appliance
fully clockwise.
DHW and DHW circulation pump
•
You can use this menu point either to ...
... Activate your individual DHW program
(Separate programmes). Recommended for
systems with several heating circuits.
- or -
... combine the DHW program with your
heating program (As heating programme).
Recommended for systems with one heating
circuit.
As heating programme (Automatic mode
together with the heating program)
With combi boiler:
•
DHW On, for as long as the heating circuit is in
the Comfort
operating mode and 1 hour
afterwards (run-on time).
Otherwise DHW Off.
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
