Paper Off-Center Adjustment - Sharp AR-M207 Service Manual
Hide thumbs
Also See for AR-M207:
- Specifications (8 pages) ,
- User manual (3 pages) ,
- Operation manual (372 pages)
Table of Contents
Advertisement
Main
Sub
code
code
50
10
Paper off-center adjustment
Used to adjust the output area (main scanning direction) of scanned image data on paper.
When this simulation is executed, the selection window of the adjustment items and the current set value
are displayed.
(Adjustment item selection window)
Sim50-10 PRT. CENTER
1:TRAY1
2:TRAY2
3:TRAY3
1/2
[
Display text
1:TRAY1
2:TRAY2 (*)
3:TRAY3 (*)
4:TRAY4 (*)
5:BYPASS
6:DUPLEX (*)
Note 1: Items marked with (*) are displayed when TRAY2 and following options are not installed.
Note 2: When executing an adjustment copy from the manual paper feed (BYPASS) tray, set the following
paper according to the destination specification.
AB series
Inch series
The adjustment value is in the range of 1 - 99. (Default: 50)
When the adjustment value is increased, the output image is shifted to the right. When the adjustment value
is increased by 1, the image is shifted to the right by about 0.1mm.
Select an adjustment item (mode) with the cross key, and enter the set value with 10-key.
When [OK] key is pressed, the entered value is saved to the EEPROM and the machine shifts to the copy
execution window.
After completion of copying, the machine returns to the adjustment value input window.
When [START] key is pressed instead of [OK] key, the machine shifts to the copy execution window and
performs copying.
(Copy start window)
Ready to copy.
S
100%
8 1/2 11
(Copy execution window)
Copies in progress.
S
100%
8 1/2 11
50
50
50
1- 99]
50
:Adjustment mode
:Print center offset (TRAY1)
:Print center offset (TRAY2)
:Print center offset (TRAY3)
:Print center offset (TRAY4)
:Print center offset (BYPASS)
:Print center offset (DUPLEX 2nd print surface)
A3 paper
Double Letter paper
AR-M207 M165 M162 SIMULATIONS 7-42
Contents
Sim50-10 PRT. CENTER
4:TRAY4
50
5:BYPASS
50
6:DUPLEX
50
2/2
[
1- 99]
50
BACK
Adjustment
Copy start
OK
item selection
window
Copy execution
START
End of copy execution
Default:
1
window
START
window
Remark
- Quick Links:
- Contents of Simulations
- Maintenance Table
Hide quick links:
Advertisement
Table of Contents
