Table of Contents
Advertisement
Introduction
Component names
Base Module (LB-DH80)_Front panel
Power button
A
Information LED
B
Control panel
C
Pressing the button causes the unit to be turned on and its LED
illuminates in green.
To turn off the unit, push the button and then select "YES" on the
selection menu of the control panel.
≥ The unit can be turned off through the control panel or Web
interface. Make the selection in the following order.
"Manage" "Shutdown" "Shutdown"
Turn off the unit after turning off the server connected to the unit or
terminating commands that are sent from the server to the unit.
Not doing so may cause trouble such as data loss or shutdown of
the server.
≥ The power button is not present on the rear panel.
≥ Even if the unit is turned off, a part of its circuitry remain on owing
to the Wake-on-LAN capability.
Informs you of errors or warnings.
≥ When the information LED illuminates in red, check the error or
warning message via the control panel.
If an error occurs, canceling the error state will turn off the
information LED. If a warning occurs, closing the popup window
on the control panel will turn off the information LED.
This panel serves as a 4.3 inch pressure-sensitive touch panel
display.
Use this touch panel to check the states and settings of the unit and
make various settings.
For more information, refer to "Operating the control panel" ( 28).
8
Advertisement
Table of Contents
