Table of Contents
Advertisement
11. DISASSEMBLY INSTRUCTION
1. Nokia 2608 disassembly.
3. Press and slip off Battery Cover.
5. Use a TORX T5 screwdriver to loosen and remove the
four screws (T1.6x2.8). When using torque driver, set
torque to 10Ncm @ 700 rpm. The tolerance is +/-2Ncm.
Page 9 (21)
Confidential
Copyright © 2008 NOKIA. All rights reserved.
Service Manual Level 1&2
2. You will need the Nokia Standard Toolkit version 2.
Also refer to the General Mechanical Guideline Video
for additional hints about the tools and component
handling.
4. Pull upward to remove Battery.
6. Place SRT-6 into the gap between C-cover and
D-Cover, move along with perimeter and lever the snaps
to separate C-cover and D-cover. (1.Left Side 2.Right
Side
3 Bottom Side)
2608 RM-376
Issue 1
Advertisement
Table of Contents
