Table of Contents
Advertisement
СРС308 Processor Module
3.4.9
PS/2 Keyboard/Mouse Interface
The module PS/2 keyboard port and PS/2 mouse port are integrated in a single connector. The
enable connection of the respective input devices: a PS/2 keyboard and a PS/2 mouse.
Structurally, the PS/2 keyboard and mouse port is a 6-pin single-in-line connector with 2 mm
contact spacing for crimpling (XP15). To connect a PS/2 keyboard to the module, it is
recommended to use the ASC00043 adapter cable (supplied with the module). Should it become
necessary to connect a PS/2 mouse as well, it is recommended to use an ASC00043 accessory
together with a Y-cable (bought separately).
When making one's own cable, it is recommended to use a PHR-6 (JST) type crimped socket with
SPH-002T-P0.5S (JST) contacts or an ACS00031-02 accessory (see Table 1 3).
Fig. 3-18: PS/2 (XP15) Connector
Table 3
13: Designation of PS/2 (XP15) Connector Contacts
-
3.4.10
Power Connector
Electric power supply of the module must meet the requirements cited in Table 2 1.
The module may be powered through both the power connector (XP25) and through the
PC/104 bus connector. The module's maximum current consumption value is 3.1 А
external devices.
Read subsection 2.2 Module Power Supply before you start working.
1)
For CPC308-03 module
C P C 3 0 8
U s e r
M a n u a l
Note
The keyboard/mouse power source is protected by a 500 mA fuse.
All signal lines have electromagnetic filters.
The Module Structure and Functioning
© 2 0 1 3
F a s t w e l
V e r . 0 0 1 b
1)
without
E
40
Advertisement
Table of Contents
