Installing The Nickel-Metal Hydride Battery - Motorola Radius CP100 Commercial Series User Manual
Hide thumbs
Also See for Radius CP100 Commercial Series:
- User manual (62 pages) ,
- User manual (96 pages) ,
- User manual (128 pages)
Table of Contents
Advertisement
Installing the Nickel-Metal Hydride Battery
Your radio is powered by an NiMH
battery, which provides up to 15 hours*
of usage. Before you install the battery,
mark the date in the "INSTALL DATE"
section with a permanent marker. As in
vehicles, all rechargable batteries lose
capacity over time.
1. Push and hold down the ribbed
latch on the bottom of the radio
toward the contacts, then slide and
lift the battery door off.
2. With the Motorola logo side up, and
the charge contacts facing the
bottom of the radio, insert the top of
the battery into the radio.
3. Push the battery up and into the
battery compartment to fit tightly
into place.
4. Slide and snap the battery door into
place.
*Based upon 5% transmit/ 5% receive/
90% standby (standard duty cycle).
Ribbed
Latch
1
2
9
Hide quick links:
Advertisement
Chapters
Table of Contents
