Programming The Interference Eliminator Code; Assigning Channels To Presets - Motorola Radius CP100 Commercial Series User Manual
Hide thumbs
Also See for Radius CP100 Commercial Series:
- User manual (62 pages) ,
- User manual (96 pages) ,
- User manual (128 pages)
Table of Contents
Advertisement
Programming the Interference Eliminator Code
The Interference Eliminator Code helps minimize interference by
providing you with code combinations, which filter out static, noise,
and unwanted messages.
1. Enter Programming Mode as necessary, refer to "Entering
Programming Mode" on page 23.
2. Press \ until the Interference Eliminator Code display number
begins to flash.
3. Press [ or ] to select the desired Code (See "Interference Eliminator Codes"
beginning on page 38).
4. Press and hold M to exit k, or press \ to continue.
Assigning Channels to Presets
Presets allow you to easily switch to more frequently-used channels.
1. Enter Programming Mode as necessary, refer to "Entering Programming Mode"
on page 23.
2. Press [ or ] to select the desired channel.
3. Press and hold T or S to assign that channel to a preset, radio beeps to
confirm. All of the channel settings are assigned to that preset button.
4. Press and hold M to exit k, or press \ to continue.
Interference
Eliminator
0107
Code
25
Hide quick links:
Advertisement
Chapters
Table of Contents
