Programming The Scramble Feature; (2-Watt Models Only); Programming Bandwidth (When Allowable) - Motorola Radius CP100 Commercial Series User Manual
Hide thumbs
Also See for Radius CP100 Commercial Series:
- User manual (62 pages) ,
- User manual (96 pages) ,
- User manual (128 pages)
Table of Contents
Advertisement
Programming the Scramble Feature
(2-watt models only)
The scramble feature garbles the transmission for anyone listening without
the same scramble setting. It does not guarantee confidentiality, but it increases
privacy. The scramble feature is set individually for each channel.
1. Enter Programming Mode as necessary, refer to "Entering Programming Mode"
on page 23.
2. Press \ until e displays.
3. Press [ or ] to select
When you exit k, e displays.
4. Press and hold M to exit k.
Programming Bandwidth (when allowable)
Some frequencies have selectable channel spacing, which must
match other radios for optimal radio quality. Bandwidth settings are
programmed for each channel.
1. Enter Programming Mode as necessary, refer to "Entering
Programming Mode" on page 23.
2. Press \ until K displays.
3. If D/C flashes, press [ or ] to select D (25.0 kHz) or C (12.5 kHz)
bandwidth. (See "Frequencies and Bandwidths" beginning on page 37). If D/C
does not flash, then you cannot select the bandwidth for this frequency.
4. Press and hold M to exit k.
26
,
, or
. Factory default is set to Off: 0.
1
2
3
e 0
C
K
Hide quick links:
Advertisement
Chapters
Table of Contents
