free hit counter
Download
Share
Print this page
Epson PowerLite Pro Z8050WNL Installation Handbook
  1. Manuals
  2. Brands
  3. Epson Manuals
  4. Projector
  5. PowerLite Pro Z8050WNL
  6. Installation handbook
Epson PowerLite Pro Z8050WNL Installation Handbook

Epson PowerLite Pro Z8050WNL Installation Handbook

Lamp and status information
Hide thumbs Also See for PowerLite Pro Z8050WNL:
1
2

Advertisement

Quick Links

Download this manual See also: User Manual
Epson PowerLite Pro Z8050WNL

Reading the Indicators

e projector is provided with the following four indicators that indicate the operating status of the projector.
Indicates the operating status.
1
Indicates the air
2
Indicates the internal temperature status.
3
Indicates the projection lamp status.
4
Refer to the following table to see what the indicators mean and how to remedy problems that they indicate.
If all indicators are
, check that the power cable is connected correctly and that the power is being supplied normally.
Sometimes, when the power cable is unplugged, the
Indicator is lit or
Status
r status.
indicator remains lit for a short period, but this is not a fault.
t
g red
Cause
Internal Error
Stop using the projector, disconnect the power cable from the electrical outlet, and contact your local dealer or the nearest
address provided in the Support and Service Guide.
Fan Error
Stop using the projector, disconnect the power cable from the electrical outlet, and contact your local dealer or the nearest
address provided in the Support and Service Guide.
Sensor Error
Cool System Error
High Temp Error
e lamp turns
switches to standby mode, so check the following two points.
(overheating)
Check that the air
If the air lter is clogged, clean or replace it.
If the error
electrical outlet, and contact your local dealer or the nearest address provided in the Support and Service Guide.
When using at an altitude of 1500 m or more, set High Altitude Mode to On.
Set Direction to Pointing Down or Pointing Up when the projector is installed to project images downward or upward.
Lamp Error
Check the following two points.
Lamp Failure
Take out the both lamps and check if they are cracked.
Clean the air lter.
If it is not cracked
If the error continues: Replace the lamp with a new lamp and turn on the power.
If the error continues: Stop using the projector, disconnect the power cable from the electrical outlet, and contact your
local dealer or the nearest address provided in the Support and Service Guide.
Standby condition
button is pressed in this condition, projection starts.
Preparing network monitoring (maximum approx. 20 minutes) or cool down in progress
Buttons are disabled while the indicator is
Warming up
Warm-up time is about 30 seconds.
button does not function during warm-up.
Projecting
and projection stops. Wait f
and air exhaust vent are clear, and that the projector is not positioned against a wall.
the points above, stop using the projector, disconnect the power cable from the
t the lamp and turn on the power.
INSTALLATION HANDBOOK
Lamp and Status Information
r warm-up is complete, the indicator stops
: Lit
Remedy or Status
nute
g.
: Flashing:
: O
tes the projector
1

Advertisement

loading

Related Manuals for Epson PowerLite Pro Z8050WNL

Summary of Contents for Epson PowerLite Pro Z8050WNL

  • Page 1: Reading The Indicators

    INSTALLATION HANDBOOK Epson PowerLite Pro Z8050WNL Lamp and Status Information Reading the Indicators e projector is provided with the following four indicators that indicate the operating status of the projector. Indicates the operating status. Standby condition button is pressed in this condition, projection starts.
  • Page 2 INSTALLATION HANDBOOK Epson PowerLite Pro Z8050WNL Lamp and Status Information Status Cause Remedy or Status If it is cracked: Replace it with a new lamp, or contact your local dealer for further advice. If replacing the lamp yourself, be careful to avoid pieces of broken glass (you cannot continue projecting until the lamp is replaced).