Step 7: Set The Printer’s Ip Address To Static - Brother HL3070CW Repair Instruction

Windows network connection

Hide thumbs Also See for HL3070CW:

Table of Contents

HL3070CW Windows Network Connection Repair Instructions

5. Click ADD PORT.

6. Choose STANDARD TCP/IP PORT then click NEW PORT. The Standard TCP/IP Printer Port Wizard will

appear.

7. Click NEXT.

8. In the field labeled PRINTER NAME OR IP ADDRESS, type the IP address of your Brother machine from

the Network Configuration sheet you printed in PART 2. Click NEXT.

9. A screen will appear with information about your Brother machine. Click FINISH. (NOTE: If you

receive a message stating that additional port information is required, this indicates that the Brother

machine is not recognized on the network. Ensure that there is no active firewall and try again. If the

machine is still not found, continue to PART 7.)

10. Click CLOSE.

11. Click APPLY. Click the GENERAL TAB.

12. Click PRINT TEST PAGE. A test page should now print correctly. If the test page does not print, click

CLOSE and close the PRINTER PROPERTIES window. Right click on the printer, then left click on

CANCEL ALL DOCUMENTS. You will need to reset and configure the wireless network card.

13. Attempt to print again. The issue should now be resolved

STEP 7: SET THE PRINTER'S IP ADDRESS TO STATIC:

Brother strongly recommends assigning the printer a static IP Address. You can use the current IP

Address or obtain a new IP Address from your network administrator or Internet Service Provider.

Once you have obtained an IP Address for the printer you will need to assign that IP Address to

the printer and set it as a static IP Address.

1. Open an Internet web browser (ex. Internet Explorer).

2. Enter the current printer IP Address on the Address line and press the Enter key on the keyboard. This

will display the printer's built in web management page.

3. Select Network Configuration. A login screen will appear. The default User Name is admin. The default

Password is access. Click OK.

4. Click Configure TCP/IP.

5. Keep the same IP Address or enter the new IP Address in the IP Address field.

6. Next to Boot Method select Static.

7. Click Submit.

8. Close the Internet web browser.

9. Print the Network Configuration from the printer again by pressing the GO button three times. Verify

the IP Address listed on the last page is the IP Address your network administrator or Internet service

provider supplied to you. To the right of the IP Address, it will indicate (set manually).

www.brother-usa.com

Table of Contents