Show Default-Vlan-Membership - Cisco 300 Series Cli Manual
Stackable managed switches
Hide thumbs
Also See for 300 Series:
- Cli manual (899 pages) ,
- Administration manual (586 pages) ,
- Quick start manual (72 pages)
Table of Contents
Advertisement
56
1055
Parameters
•
vlan-id
—Specifies the default VLAN ID.
Default Configuration
The default VLAN is 1 by default.
Command Mode
VLAN Database Configuration mode
User Guidelines
This command becomes effective after reboot of the device.
Example
The following example defines the default VLAN as 2.
switchxxxxxx(config)#
switchxxxxxx(config-vlan)#
New Default VLAN ID will be active after save configuration and reboot device.
56.5 show default-vlan-membership
Use the show default-vlan-membership privileged EXEC command to view the
default VLAN membership.
Syntax
show default-vlan-membership [
Parameters
•
interface-id
—Specifies an interface ID. The interface ID can be one of the
following types: Ethernet port or port-channel.
•
detailed—Displays information for non-present ports in addition to present
ports.
Default Configuration
Membership in the default VLAN is displayed for all interfaces. If detailed is not
used, only present ports are displayed.
Virtual Local Area Network (VLAN) Commands
vlan database
default-vlan vlan
interface-id
OL-32830-01 Command Line Interface Reference Guide
2
| detailed]
Advertisement
Table of Contents
