Private-Vlan Association - Cisco 300 Series Cli Manual
Stackable managed switches
Hide thumbs
Also See for 300 Series:
- Cli manual (899 pages) ,
- Administration manual (586 pages) ,
- Quick start manual (72 pages)
Table of Contents
Advertisement
56
1081
Example
The following example set vlan 2 to be primary vlan:
switchxxxxxx(config)#
switchxxxxxx(config-if)#
56.29 private-vlan association
Use the private-vlan association Interface VLAN Configuration mode command to
configure the association between the primary VLAN and secondary VLANs. Use
the no form of this command to remove the association.
Syntax
private-vlan association [add | remove]
no private-vlan association
Parameters
•
secondary-vlan-list
add
primary VLAN. Separate nonconsecutive VLAN IDs with a comma and no
spaces. Use a hyphen to designate a range of IDs.This is the default action.
•
secondary-vlan-list
remove
association from a primary VLAN. Separate nonconsecutive VLAN IDs with
a comma and no spaces. Use a hyphen to designate a range of IDs.
Default Configuration
No private VLANs are configured.
Command Mode
Interface (VLAN) Configuration mode
User Guidelines
•
The command can only be executed in the context of the primary VLAN.
•
A private VLAN cannot be removed or have its type changed, if it is
associated with other private VLANs.
•
A primary VLAN can be associated with only a single, isolated VLAN.
•
A secondary VLAN can be associated with only one primary VLAN.
Virtual Local Area Network (VLAN) Commands
interface vlan 2
private-vlan primary
secondary-vlan-list
—List of VLAN IDs of type secondary to add to a
—List of VLAN IDs of type secondary to remove
OL-32830-01 Command Line Interface Reference Guide
Advertisement
Table of Contents
