Show Vlan Private-Vlan - Cisco 300 Series Cli Manual
Stackable managed switches
Hide thumbs
Also See for 300 Series:
- Cli manual (899 pages) ,
- Administration manual (586 pages) ,
- Quick start manual (72 pages)
Table of Contents
Advertisement
Virtual Local Area Network (VLAN) Commands
OL-32830-01 Command Line Interface Reference Guide
•
The port is added as untagged to the primary VLAN and to the secondary
VLAN.
•
The PVID is set to the VLAN-ID of the secondary VLAN.
•
The port ingress filtering is enabled.
The port association configuration for an isolated secondary VLAN includes:
•
The port is added as untagged only to the primary VLAN and is not added
to the secondary VLAN.
•
The PVID is set to the VLAN-ID of the secondary VLAN.
•
The port ingress filtering is disabled.
Example
The following example set port gi 1 4 to secondary VLAN 20 in primary VLAN 10.
switchxxxxxx(config)#
switchxxxxxx(config-if)#
56.32 show vlan private-vlan
Use the show vlan private-vlan EXEC mode command to display private VLAN
information.
Syntax
show vlan private-vlan [tag
Parameters
•
vlan-id
tag
—Primary VLAN that represent the private VLAN to be displayed.
Default Configuration
All private VLANs are displayed.
Command Mode
User EXEC mode
interface gi14
switchport private-vlan host-association
vlan-id
]
56
10 20
1084
Advertisement
Table of Contents
