free hit counter

Netbios-Node-Type - Cisco 300 Series Cli Manual

Stackable managed switches
Hide thumbs Also See for 300 Series:
Table of Contents

Advertisement

DHCP Server Commands
OL-32830-01 Command Line Interface Reference Guide
switchxxxxxx(config-dhcp)#

12.15 netbios-node-type

To configure the NetBIOS node type for Microsoft DHCP clients, use the
netbios-node-type command in DHCP Pool Network Configuration mode or in
DHCP Pool Host Configuration mode. To return to default, use the no form of this
command.
Syntax
netbios-node-type {b-node | p-node | m-node | h-node}
no netbios-node-type
Parameters
b-node—Specifies the Broadcast NetBIOS node type.
p-node—Specifies the Peer-to-peer NetBIOS node type.
m-node—Specifies the Mixed NetBIOS node type.
h-node—Specifies the Hybrid NetBIOS node type.
Command Mode
DHCP Pool Network Configuration mode
DHCP Pool Host Configuration mode
Default Configuration
h-node (Hybrid NetBIOS node type).
Example
The following example specifies the client's NetBIOS type as mixed.
switchxxxxxx(config-dhcp)#
netbios-name-server 10.12.1.90
netbios node-type m-node
12
292

Advertisement

Table of Contents
loading