Option - Cisco 300 Series Cli Manual

Stackable managed switches

Table of Contents

12.18 option

To configure the DHCP server options, use the option command in DHCP Pool

Network Configuration mode or in DHCP Pool Host Configuration mode. To

remove the options, use the no form of this command.

{boolean {false | true} | integer

} | ip-list {

—Specifies the DHCP option code. The supported values are defined

in the User Guidelines.

boolean {false | true}—Specifies a boolean value. The values are coded by

integer values of one octet: 0 = false and 1 = true.

—Specifies an integer value. The option size depends on the

option code.

—Specifies a network virtual terminal (NVT) ASCII character

string. ASCII character strings that contain white spaces must be delimited

by quotation marks. The ASCII value is truncated to the first 160 characters

—Specifies an IP address.

—Specifies dotted hexadecimal data. The hexadecimal value is

truncated to the first 320 characters entered. Each byte in hexadecimal

character strings is two hexadecimal digits. Each byte can be separated by

a period, colon, or white space.

hex none—Specifies the zero-length hexadecimal string.

Command Mode

DHCP Pool Network Configuration mode

DHCP Pool Host Configuration mode

...]}—Specifies up to 8 IP addresses.

—User description

OL-32830-01 Command Line Interface Reference Guide

DHCP Server Commands

...]}} [description

| none} | ip