Storm-Control Broadcast Level - Cisco 300 Series Cli Manual
Stackable managed switches
Hide thumbs
Also See for 300 Series:
- Cli manual (899 pages) ,
- Administration manual (586 pages) ,
- Quick start manual (72 pages)
Table of Contents
Advertisement
18
415
Parameters
This command has no arguments or keywords.
Default Configuration
Disabled
Command Mode
Interface (Ethernet) Configuration mode
User Guidelines
Use the
storm-control include-multicast
Multicast packets and optionally unknown Unicast packets in the storm control
calculation.
Example
switchxxxxxx(config)#
switchxxxxxx(config-if)#
18.27 storm-control broadcast level
To configure the maximum rate of broadcast, use the storm-control broadcast
level Interface (Ethernet) Configuration mode command. To return to default, use
the no form of this command.
Syntax
storm-control broadcast level {
no storm-control broadcast level
Parameters
•
level—Suppression level in percentage. Block the flooding of storm packets
when the value specified for level is reached. (Range 1-100)
•
kbps—Maximum of kilobits per second of Broadcast traffic on a port.
(Range 3500 –100000)
Interface Configuration command to count
interface gi11
storm-control broadcast enable
level
| kbps
kbps
OL-32830-01 Command Line Interface Reference Guide
Ethernet Configuration Commands
}
Advertisement
Table of Contents
