Ip Igmp Snooping Vlan Static - Cisco 300 Series Cli Manual
Stackable managed switches
Hide thumbs
Also See for 300 Series:
- Cli manual (899 pages) ,
- Administration manual (586 pages) ,
- Quick start manual (72 pages)
Table of Contents
Advertisement
21
437
Command Mode
Global Configuration mode
User Guidelines
A port that is a forbidden mrouter port cannot be a Multicast router port (i.e. cannot
be learned dynamically or assigned statically).
You can execute the command before the VLAN is created.
Example
switchxxxxxx(config)# ip igmp snooping vlan 1 forbidden mrouter interface
gi1
1
21.6 ip igmp snooping vlan static
To register an IP-layer Multicast address to the bridge table, and to add static ports
to the group defined by this address, use the ip igmp snooping vlan static
command in Global Configuration mode. To return to the default, use the no form of
this command.
Syntax
ip igmp snooping vlan
no ip igmp snooping vlan
Parameter
•
vlan-id
—Specifies the VLAN.
•
ip-address
—Specifies the IP Multicast address.
•
interface i
nterface-list
interfaces can be of one of the following types: Ethernet port or
Port-channel.
Default Configuration
No Multicast addresses are defined.
vlan-id
ip-address
static
vlan-id
ip-address
static
—(Optional) Specifies a list of interfaces. The
OL-32830-01 Command Line Interface Reference Guide
IGMP Snooping Commands
interface-list
[interface
interface-list
[interface
]
]
Advertisement
Table of Contents
