Ipv6 Neighbor Binding Attach-Policy (Vlan Mode) - Cisco 300 Series Cli Manual

Stackable managed switches

Table of Contents

IPv6 First Hop Security

OL-32830-01 Command Line Interface Reference Guide

Example 4—In the following example, Neighbor Binding Integrity detaches policy

policy1 detached to the gi 1 1 port:

switchxxxxxx(config)#

switchxxxxxx(config-if)#

switchxxxxxx(config-if)# exit

25.43 ipv6 neighbor binding attach-policy

To attach a Neighbor Binding policy to a specific VLAN, use the ipv6 neighbor

binding attach-policy command in VLAN Configuration mode. To return to the

default, use the no form of this command.

ipv6 neighbor binding attach-policy

no ipv6 neighbor binding attach-policy

—The Neighbor Binding policy name (up to 32 characters).

Default Configuration

The Neighbor Binding default policy is applied.

Command Mode

Interface (VLAN) Configuration mode

User Guidelines

Use this command to attach a Neighbor Binding policy to a VLAN.

If a policy specified by the

Use the no form of the command to return to detach the current policy and

reattach the default policy. The no form of the command has no effect if the default

policy was attached.

interface gi11

no ipv6 neighbor binding attach-policy policy1

argument is not defined, the command is