Logging Binding - Cisco 300 Series Cli Manual

Stackable managed switches

Table of Contents

The policy cannot be attached by the

command. The port_default policy is attached by default to a port, if no other

policy is attached to the port.

If an attached policy is removed, it is detached automatically before removing.

Example 1—The following example defines the IPv6 Source Guard policy named

policy1, places the router in IPv6 Source Guard Policy Configuration mode, and

configures the port as trusted:

switchxxxxxx(config)#

switchxxxxxx(config-ipv6-srcguard)#

switchxxxxxx(config)# exit

Example 2—The following example removes the attached IPv6 Source Guard

switchxxxxxx(config)#

Policy policy1 is applied on the following ports:

The policy1 will be detached and removed, are you sure [Y/N]Y

25.52 logging binding

To enable the logging of Binding table main events within an IPv6 Neighbor

Binding policy, use the logging binding command in Neighbor Binding Policy

Configuration mode. To return to the default, use the no form of this command.

logging binding [enable | disable]

no logging binding

ipv6 source guard attach-policy (port mode)

ipv6 source guard policy policy1

trusted-port

no ipv6 source guard policy policy1

OL-32830-01 Command Line Interface Reference Guide

IPv6 First Hop Security