free hit counter

Cisco 300 Series Cli Manual page 680

Stackable managed switches
Hide thumbs Also See for 300 Series:
Table of Contents

Advertisement

Link Layer Discovery Protocol (LLDP) Commands
OL-32830-01 Command Line Interface Reference Guide
Field
Device type
LLDP MED - Network Policy
Application type
Flags
VLAN ID
Layer 2 priority
DSCP
LLDP MED - Power Over Ethernet
Power type
Power Source
Power priority
Power value
LLDP MED - Location
Coordinates, Civic
address, ECS ELIN.
Description
The device type. Indicates whether the sender is a
Network Connectivity Device or Endpoint Device,
and if an Endpoint, to which Endpoint Class it
belongs.
The primary function of the application defined for
this network policy.
Flags. The possible values are:
Unknown policy: Policy is required by the device,
but is currently unknown.
Tagged VLAN: The specified application type is
using a Tagged VLAN.
Untagged VLAN: The specified application type is
using an Untagged VLAN.
The VLAN identifier for the application.
The Layer 2 priority used for the specified
application.
The DSCP value used for the specified application.
The device power type. The possible values are:
Power Sourcing Entity (PSE) or Power Device (PD).
The power source utilized by a PSE or PD device. A
PSE device advertises its power capability. The
possible values are: Primary power source and
Backup power source. A PD device advertises its
power source. The possible values are: Primary
power, Local power, Primary and Local power.
The PD device priority. A PSE device advertises the
power priority configured for the port. A PD device
advertises the power priority configured for the
device. The possible values are: Critical, High and
Low.
The total power in watts required by a PD device
from a PSE device, or the total power a PSE device
is capable of sourcing over a maximum length cable
based on its current configuration.
The location information raw data.
30
680

Advertisement

Table of Contents
loading

Table of Contents