Rate-Limit (Ethernet) - Cisco 300 Series Cli Manual
Stackable managed switches
Hide thumbs
Also See for 300 Series:
- Cli manual (899 pages) ,
- Administration manual (586 pages) ,
- Quick start manual (72 pages)
Table of Contents
Advertisement
Quality of Service (QoS) Commands
OL-32830-01 Command Line Interface Reference Guide
Example
The following example sets a shaper on queue 1 on gi 1 1 when the average traffic
rate exceeds 124000 kbps or the normal burst size exceeds 9600 bytes.
switchxxxxxx(config)# interface gi11
switchxxxxxx(config-if)#
39.22 rate-limit (Ethernet)
Use the rate-limit Interface (Ethernet) Configuration mode command to limit the
incoming traffic rate on a port. Use the no form of this command to disable the rate
limit.
Syntax
committed-rate-kbps [burst committed-burst-bytes]
rate-limit
no rate-limit
Parameters
•
committed-rate-kbps—Specifies the maximum number of kilobits per
second of ingress traffic on a port. The range is 100 –maximal port speed.
•
burst committed-burst-bytes
3000–19173960). If unspecified, defaults to 128K.
Default Configuration
Rate limiting is disabled.
Committed-burst-bytes is 128K.
Command Mode
Interface (Ethernet) Configuration mode
User Guidelines
Storm control and rate-limit (of Unicast packets) cannot be enabled simultaneously
on the same port.
traffic-shape queue
—The burst size in bytes. (Range:
1 64 4096
39
766
Advertisement
Table of Contents
