Cisco 300 Series Cli Manual page 81

Stackable managed switches

Table of Contents

Host mode—The port authentication configured mode. Possible values:

single-host, multi-host, multi-sessions.

multi-sessions

Authentication methods—Authentication methods configured on port.

Possible values are combinations of the following methods:

Port Administrated status—The port administration (configured) mode.

Possible values: force-auth, force-unauth, auto.

Port Operational status—The port operational (actual) mode. Possible

values: authorized or unauthorized.

Username—Username representing the supplicant identity. This field

shows the username if the port control is auto. If the port is Authorized, it

displays the username of the current user. If the port is Unauthorized, it

displays the last user authorized successfully.

Quiet period—Number of seconds that the device remains in the quiet state

following a failed authentication exchange (for example, the client provided

an invalid password).

Silence period—Number of seconds that If an authorized client does not

send traffic during the silence period specified by the command, the state

of the client is changed to unauthorized.

Tx period—Number of seconds that the device waits for a response to an

Extensible Authentication Protocol (EAP) request/identity frame from the

client before resending the request.

Max req—Maximum number of times that the device sends an EAP request

frame (assuming that no response is received) to the client before restarting

the authentication process.

Supplicant timeout—Number of seconds that the device waits for a

response to an EAP-request frame from the client before resending the

OL-32830-01 Command Line Interface Reference Guide

802. 1 X Commands