Cisco 300 Series Cli Manual page 865

Stackable managed switches

Table of Contents

excluded—Specifies that the view type is excluded.

oid-tree—(Optional) Specifies the ASN.1 subtree object identifier to be

included or excluded from the view. To identify the subtree, specify a text

string consisting of numbers, such as 1.3.6.2.4, or a word, such as System

and, optionally, a sequence of numbers. Replace a single sub-identifier with

the asterisk (*) wildcard to specify a subtree family; for example 1.3.*.4. This

parameter depends on the MIB being specified.

Default Configuration

The following views are created by default:

Default—Contains all MIBs except for those that configure the SNMP

parameters themselves.

DefaultSuper—Contains all MIBs.

Command Mode

Global Configuration mode

User Guidelines

This command can be entered multiple times for the same view.

The command's logical key is the pair (view-name, oid-tree). Therefore there

cannot be two commands with the same view-name and oid-tree.

The number of views is limited to 64.

Default and DefaultSuper views are reserved for internal software use and cannot

be deleted or modified.

The following example creates a view that includes all objects in the MIB-II system

group except for sysServices (System 7) and all objects for interface 1 in the

MIB-II interface group (this format is specified on the parameters specified in

switchxxxxxx(config)#

Network Management Protocol (SNMP) Commands

snmp-server view user-view system included

snmp-server view user-view system.7 excluded

snmp-server view user-view ifEntry.*.1 included

OL-32830-01 Command Line Interface Reference Guide