Table of Contents
Advertisement
Removing the rear cable bracket
To remove the on/off reset board:
1. Power off the server
2. Disconnect cables.
3. Press the arrow on the tab of the rear cable bracket 1 to release the bracket
4. Carefully peel away the adhesive strip 2 .
5. Remove the screws 3 .
6. Gently pull the rear cable bracket 1 to remove.
1
Rear cable bracket
2
Adhesive strip
3
Screws (2)
arm.
FRU information (service only)
121
Advertisement
Table of Contents
Troubleshooting
