Table of Contents
Advertisement
Error Code/Symptom
161 (Real time clock battery error)
162 (Device Configuration Error)
Note: Be sure to load the default settings and
any additional desired settings; then, save the
configuration
163 (Real-Time Clock error)
164 (Memory configuration changed, see
"Memory settings" on page 34.)
175 (Hardware error)
176 (Computer cover or cable cover was
removed without a key being used)
177, 178 (Security hardware error)
184 (Power-on password corrupted)
185 (Drive startup sequence information
corrupted)
186 (Security hardware control logic failed)
187 (VPD serial number not set.)
188 (Bad EEPROM CRC #2)
189 (An attempt was made to access the
server with invalid passwords)
201 (Memory test error, see "Memory
Settings" on page 34.) If the server does not
have the latest level of BIOS installed, update
the BIOS to the latest level and run the
diagnostic program again.
229 (Cache error)
262 (DRAM parity configuration error)
FRU/Action
1. Run Configuration/Setup
2. Battery
3. System Board
1. Run Configuration/Setup
2. Battery
3. Failing Device
4. System Board
1. Run Configuration/Setup
2. Battery
3. System Board
1. Run Configuration/Setup
2. DIMM
3. System Board
1. System Board
1. Run Configuration/Setup
2. System Board
3. C2 Security Switch
1. Run Configuration/Setup
2. System Board
1. Run Configuration/Setup
2. System Board
1. Run Configuration/Setup
2. System Board
1. Run Configuration/Setup
2. System Board
1. Set serial number in Setup
2. System Board
1. Run Configuration/Setup
2. System Board
1. Run Configuration/Setup, enter the administrator password
1. DIMM
2. System Board
1. Processor
2. Optional Processor (if installed)
3. System Board
1. Run Configuration/Setup
2. Battery
3. System Board
135
Symptom-to-FRU index
Advertisement
Table of Contents
Troubleshooting
