Table of Contents
Advertisement
7.1.2 DISASSEMBLY
- Removing the upper case (not shown)
1. Remove the five screws, then remove the upper
case.
- Removing the Extend Unit (Fig. 1)
1. Remove the three screws B, then remove the side
frame and holder.
2. Remove screw C, screw D and PCB from the con-
nector.
3. Straighten the three currently bent claws, then
remove the extend unit.
- Removing the Grille Assy (Fig. 1)
1. Remove the two screws A and the connector,
then remove the grille assy.
- Removing the CD Mechanism Module (Fig. 2)
1. Remove the three screws A, then remove the
front frame.
2. Remove the three screws B and two screws C,
then remove the damper and holder.
3. Remove the two spring As, spring B and spring
C from the hook, then remove the CD mecha-
nism module.
– Precautions on Assembly –
Apply spring C (black) to the front
side hook.
Remaining springs A and B are to be
hung on the center hook.
- Removing the Keyboard PCB (Fig. 3)
1. Remove screws A and B, then remove the switch
PCB.
2. Remove the four screws D, then remove the
guide.
3. Remove the three screws C, then remove the key-
board PCB.
– Precautions on Assembly (Fig. 4) –
When mounting the switch PCB,
lower the white lever so as to prevent
the switch arm from bending.
Grille
Damper
Holder
Holder
Damper
Front Frame
Fig. 4
Keyboard PCB
CDX-PD6
Holder
Extend Unit
Side Frame
PCB
Fig. 1
CD Mechanism Module
Damper
Damper
Holder
Holder
Fig. 2
Switch PCB
Guide
Grille Unit
Fig. 3
55
Hide quick links:
Advertisement
Table of Contents
