Table of Contents
Advertisement
Using the Lighting Type
Set the ambient light environment to help
Intelligent AutoView function more eff ectively.
• This can be set when Picture Mode is set to
Intelligent AutoView.
1
From the PICTURE menu, press or to
select Lighting Type.
2
Press or to select Fluorescent Light or
Light Bulb.
Adjusting the Colour Management
You can adjust the picture colour quality by
selecting from 6 base colour adjustments : Red,
Green, Blue, Yellow, Magenta or Cyan.
1
From the PICTURE menu, press or to
select 3D Colour Management.
2
Press or to select On.
3D Colour Management
3
Press or to select Base Colour
Adjustment.
4
Press OK, then press or to select an item
you want to adjust.
Base Colour Adjustment
Hue
Red
0
Green
0
Blue
0
Yellow
0
Magenta
0
Cyan
0
Reset
5
Press , then press or to select Hue,
Saturation or Brightness.
6
Press or to adjust the settings as required.
Hue
Red
0
NOTE:
If you select 3D Colour Management Off mode, this
mode is not available.
32405055L2550_EN.indd 23
32405055L2550_EN.indd 23
Using the TV's features
On
Saturation
Brightness
0
0
0
0
0
0
0
0
0
0
0
0
Saturation
Brightness
0
0
Resetting the Base Colour Adjustment
The reset function adjusts the base colour
adjustment to the factory settings.
1
From the Base Colour Adjustment menu, press
or to select Reset.
2
Press OK.
3
A confi rmation message will appear. Press or
to select Yes, and then press OK.
Using the Active Backlight Control
In order to improve screen visibility, the Active
Backlight Control sets the screen brightness
automatically during dark scenes.
1
From the PICTURE menu, press or to
select Active Backlight Control.
2
Press or to select On or Off .
Using the Picture Analyser
Displays the picture histogram.
1
From the PICTURE menu, press or to
select Picture Analyser.
Histogram: Shows the bright and dark areas of
the displayed picture, and the distribution of
colours in a graph.
Contrast Curve: Shows the correction curve,
which improves the expressive feel of the
displayed picture, in a graph.
To close the Picture Analyser screen, press
EXIT.
Stereo and Bilingual transmissions
(for DTV programmes)
For stereo or dual mono broadcasts, press s and
use or to select settings.
Mode Display
d Stereo
Stereo S Left S Right
j Dual mono
Dual 1 S Dual 2 S Dual
e Mono
Surround
For multi-audio track broadcasts, press s
repeatedly to change the audio language (- page
32).
Pressing
–
–
23
27/02/02 15:40:09
27/02/02 15:40:09
Hide quick links:
Advertisement
Table of Contents
