Ip Host - Cisco 300 Series Cli Manual
Small business 300 series managed switches
command line interface guide release 1.3
Hide thumbs
Also See for 300 Series:
- Cli manual (1117 pages) ,
- Administration manual (586 pages) ,
- Quick start manual (72 pages)
Table of Contents
Advertisement
8
158
Parameters
seconds—Time, in seconds, to wait for a response to a DNS query. The range is
from 1 to 60.
Default Configuration
The default value is 3 seconds.
Command Mode
Global Configuration mode
User Guidelines
Use the command to change the default time out value. Use the no form of this
command to return to the default time out value.
Example
The following example shows how to configure the switch to wait 50 seconds for a
response to a DNS query:
ip domain timeout 50
87
ip host
Use the ip host Global Configuration mode command to define the static
host-name-to-address mapping in the DNS host name cache.
Use the no form of this command to remove the static-host name-to-address
mapping.
Syntax
name address1
ip host
name
no ip host
ip host
Parameters
•
name—Name of the host. Length: 1–158 characters. Maximum label length
of each domain level is 63 characters.
•
address1—Associated host IP address (IPv4 or IPv6, if IPv6 stack is
supported).
address2...address8
[
name
address1...address8
[
78-21075-01 Command Line Interface Reference Guide
DNS Client Commands
]
]
Advertisement
Table of Contents
