Cisco 300 Series Cli Manual page 262

Small business 300 series managed switches command line interface guide release 1.3

Table of Contents

radius—Uses a RADIUS server for accounting.

tacacs+—Uses a TACACS+ server for accounting.

Default Configuration

Command Mode

Global Configuration mode

User Guidelines

This command enables the recording of device management sessions (Telnet,

serial and WEB but not SNMP).

It records only users that are identified with a username (e.g. a user that is logged

in with a line password is not recorded).

If accounting is activated, the device sends "start/stop" messages to the

RADIUS/TACACS+ server when a user logs in/logs out respectively.

The device uses the configured priorities of the available RADIUS/TACACS+

servers to select the RADIUS/TACACS+ server.

The following table describes the supported RADIUS accounting attributes

values, and in which messages they are sent by the switch.

User-Name (1)

NAS-IP-Address (4)

Called-Station-ID (30)

Authentication, Authorization and Accounting (AAA) Commands

User's identity.

The switch IP address that

is used for the session with

the RADIUS server.

Arbitrary value is included

in all accounting packets for

a specific session.

The switch IP address that

is used for the management

78-21075-01 Command Line Interface Reference Guide